CRL Ultra Brass Geneva 045 Series 135 Degree Glass-to-Glass Hinge - GEN045UBR
These new CRL Geneva 045 Series 135 Degree Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135 Degree angle. Geneva Hinges are self-centering, and contain a reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel. Standard Reversible Pivot Pin: Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pivot Pin is marked at 90 degrees; the opposite side of the Pivot Pin is marked 85 degrees. Standard Geneva Hinges come with the 90 degrees side activated, which brings the door to the standard closing position. Offset Models come with the Pin pre-set for 85 degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Custom Pivot Pin: Custom Pivot Pins are available to accommodate "off-angle" installations. If the standard 5 Degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree). If using the Custom Pivot Pin, call our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin. Using two hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 80 pounds (36 kilograms) with a maximum width of 28 inches (711 millimeters). Using three hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 120 pounds (54 kilograms) with a maximum width of 32 inches (813 millimeters). Specifications: Glass Thickness: 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. There are many standard finishes, and custom finishes that are available upon request. Templates specific to the GEN045 Hinges are packed in each box, or are available by contacting the CRL Technical Sales Shower Door Department at (800) 421-6144 Ext. 7740, or by e-mail.