Shop our Favorite Brands

Menu
Cart 0
CRL Oil Rub Bronze Elite 074 Series Wall Mount Hinge

CRL Oil Rub Bronze Elite 074 Series Wall Mount Hinge

  • $ 128.30


The CRL Elite Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. The Elite Series is a premium hinge for the wider and heavier glass doors. Unlike most other hinges, the Elite can be side mounted on the top and bottom corners of the door, or anywhere in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations. Standard Reversible Pivot Pin: Each Elite Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degrees. The opposite side is marked 85 degrees. Standard Elite Hinges come with the 90 degrees side activated. Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the Standard 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin. Using two hinges with 3/8 or 1/2 inch glass (10 or 12 millimeters) the hinge will hold up to 95 pounds (43 kilograms) with a maximum width of 34 inches (864 millimeters). Using three hinges with 3/8 or 1/2 inch glass (10 or 12 millimeters) the hinge will hold up to 140 pounds (64 kilograms) with a maximum width of 38 inches (965 millimeters). Specifications:
  • Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass
  • Special Feature: Elite has the ability to be side mounted at the top and bottom corners of the door, or anywhere in-between. Corner mounting allows more glass exposure
  • Construction: Solid Brass
  • Hinge Swings: 90 Degrees Inwards and Outwards
  • Closing Type: Self-Centering when within 15 Degrees of closed position
  • Cut-Out and Hole Required
  • Includes: One Hinge, Gaskets, Screws and Template Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department at (800) 421-6144, Ext. 7740, or e-mail to CRL Technical Sales.