CRL Chrome Junior Geneva 037 Series Wall Mount Full Back Plate Hinge - JRG037CH
CRL Junior Geneva Series of professional hinges are able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90, 135 and 180 Degrees Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5 degree offset door closure. Standard Reversible Pivot Pin: Each Junior Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degrees. The opposite side is marked 85 degrees. Standard Junior Geneva Hinges come with the 90 degrees side activated. Offset Models come with the Pin pre-set to 85 degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Custom Pivot Pin: Custom Pivot Pins (Cat. No. JRGENP1N) are available to accommodate "off-angle" installations. If the Standard 5 degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin. Using two hinges with 1/4 or 5/16 inch glass (6 or 8 millimeters) the hinge will hold up to 62 pounds (28 kilograms) with a maximum width of 28 inches (711 millimeters). Using three hinges with 1/4 or 5/16 inch glass (6 or 8 millimeters) the hinge will hold up to 92 pounds (42 kilograms) with a maximum width of 32 inches (813 millimeters). Specifications:
Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass Special Feature: Contains a Reversible 5 Degree Pivot Pin. When activated, it allows 5 degree tighter door closure Construction: Solid Brass Hinge Swings: 90 Degrees Inwards and Outwards Closing Type: Self-Centering when within 15 Degrees of closed position Cut-Out Required Includes: One Hinge, Gaskets, Screws and Template
Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department by calling (800) 421-6144, Ext. 7740, or by e-mail.