CRL Brush Nickel Geneva 345 Series Adjustable 135 Deg. Glass-to-Glass Hinge
The CRL Geneva Adjustable Series of professional hinges is able to accommodate 5/16 to 1/2 inch (8 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. Tighten the Allen screws in the new self-centering location. The door can swing 90 degrees inward and also 90 degrees outward (adjusting angle from factory set position will reduce 90 degrees swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb. Using two hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 80 pounds (36 kilograms) with a maximum width of 28 inches (711 millimeters). Using three hinges with 5/16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 120 pounds (54 kilograms) with a maximum width of 32 inches (813 millimeters). Specifications:
Glass Thickness: 5/16 to 1/2 inch (8 to 12 millimeter) Tempered Safety Glass Special Feature: Adjustable to any angle up to 90 degree without having to take door down Construction: Solid Brass Hinge Swings: 90 Degrees Inwards and Outwards (at factory set position) Closing Type: Precise closing at 0 degrees Cut-Out Required Includes: One Hinge, Gaskets, Screws and Template.
Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department at (800) 421-6144, Ext. 7740, or by e-mail.