CRL 24 ml Loctite® Minute Bond Adhesive and Primer - 3325
CRL Loctite Minute Bond Adhesive permanently bonds non-porous materials such as glass, metal, tile, coated wood, plastics and nylon with superior strength holding power up to 3,000 psi. The combined primer and adhesive two-step application offers handling strength in 10 seconds, 60% full strength in two minutes, and a full cure in 24 hours. For best performance bond surfaces should be clean and free of grease. Simply apply a generous amount of primer to one of the bond surfaces and apply Minute Bond to the other surface (be sure of position exactly, since Minute Bond works so quickly). Excess adhesive outside joined surfaces can be wiped away with organic solvent. For years, major domestic and foreign auto makers have relied on Minute Bond to mount rear view mirror brackets to windshields. Note: Minute Bond Adhesive is recommended only for use on non-porous flat surfaces. The recommended bondline gap is .004 inch (.1 millimeter). Where bond gaps are large, (up to a maximum of .02 inch (.5 millimeter)), or faster cure speed is required, primer should be applied to both surfaces. Optimum results if primer is applied at 72°F (22°C) or warmer. Kit contains both adhesive and primer.